You May Also Like
Fasco F58AC ROOFLOC-75 Metal Roofing Tool, 1-1/2" to 3"
Box Count
1
SKU
11547F
$611.00
FREE SHIPPING
Fasco F58AC ROOFLOC-75 Metal Roofing Tool, 1-1/2" to 3" 11547F
Box Count: 1
$611.00
Qty:
In Stock,Subject To Manufacturer Availability
The Fasco F58AC ROOFLOC-75 2.0 metal roofing system offers a lightweight body, and is easy to handle, driving 0 degree RoofLoc Scrail plastic sheet strips from 1-1/2" to 3" in length. RoofLoc 2.0 features a redesigned nose for better placement in tight areas, increased durability, and improved visibility for shot placement. The improved trigger and rear foot design lends this Fasco roofing system to be the ultimate solution for high performance metal roofing and siding installation. Compare the ROOFLOC-75 for speed and reliability against both bulk and collated screw systems. The Fasco F58AC fires one RoofLoc Scrail at a time, and features a rear loading magazine with a capacity of 30 Scrails. Air consumption for each shot is 90 PSI. The Fasco RoofLoc system uses EPDM leak proof washers that are resistant to cold and hot temperatures, ranging from -40 to 250 degrees Fahrenheit. This Fasco roofing scrailer is designed to attach metal roofing and siding to wood, and comes with a one-year warranty from the manufacturer.
WARNING: California residents, this item qualifies for Proposition 65 legislation.
- Box Count 1
- SKU 11547F
- UPC 6595011555761
- Power Type Pneumatic
- Collation Type Wire Weld
- Maximum Fastener Length 3"
- Condition New
- Case/Bag Included No
- Included In Box Wrenches, Oil
- Manufacturer's Warranty One-Year Limited
- Item Width 5-3/25"
- Item Height 14-19/25"
- Item Length 16-17/50"
- Magazine Capacity 30
- Country of Manufacture Italy
- Item Weight 9.10 lbs.
- Usage Type Exterior
- Minimum Fastener Length 1-1/2"
- Housing Material Aluminum
- Operating Pressure 100 to 120 PSI
- Firing Type Single Shot
- Air Inlet Size 3/8" NPT
- Air Consumption 1.86 SCFM
- Model F58AC ROOFLOC-75
- Depth Control No
- Power Source Air
- Special Offer No
- Product Degree/Angle 0 Degree
- Magazine Type Strip
- Fastener Type RoofLoc Scrail
How easy is it to get consistent depth driving of scrails to get optimal squeeze on the EPDM washer for sealing out weather w/o stressing the washer?
Can you use other fasteners with this nail gun? Do they have to be fasco fasteners or can it be a standard 2 1/2” framing nail from the hardware store? Can the fasco scrails with washer be used in other nail guns?
Write Your Own Reviews