You May Also Like
Senco JN91H2 Metal Connector Nailer, 1-1/2"
Box Count
1
SKU
JN91H2
$225.00
FREE SHIPPING
Senco JN91H2 Metal Connector Nailer, 1-1/2" JN91H2
Box Count: 1
$225.00
Qty:
In Stock,Subject To Manufacturer Availability
The new Senco JN91H2, offers a new extended magazine capable of holding two racks of 34° paper tape-collated nails, increasing productivity and reducing reload time. Offering the same lightweight design with the power to drive metal connector nails into the toughest substrates, including engineered lumber. Use the JN91H2 to fasten joist hangers, seismic/hurricane ties, rafter ties, post bases/caps, foundation anchors and other metal framing hardware.
The Senco JN91H2 features an updated rotating belt hook, a nose piece that provides accurate nail placement into pre-punched metal connector holes, a dry-fire lockout to prevent dry firing, a signal that indicates when ready to load, and a 360 adjustable exhaust cap. This JN91H2 drives non-heat treated 1-1/2" metal connector nails. This joist hanger comes complete with Senco's five-year limited warranty, tool oil, safety glasses, air plug and wrenches. Additional features include a single strip to allow increased maneuverability in tight spaces, an innovative nosepiece design, an overmold grip for increase control, and a sequential actuation.
Formerly sold as the Senco JoistPro 150MXP (10P0001N).
WARNING: California residents, this item qualifies for Proposition 65 legislation.
- Box Count 1
- SKU JN91H2
- UPC 741474150456
- Power Type Pneumatic
- Collation Type Paper Tape
- Application Type Joist Hangers, Hurricane Ties, Foundation Caps, Metal Connectors, Metal Framing
- Brand Senco
- Maximum Fastener Length 1-1/2"
- Condition New
- Fastener Compatibility 34° Metal Connector Paper Tape Non-Heat Treated Nails
- Product Color Red/Black
- Case/Bag Included No
- Included In Box Wrenches, Tool Oil, Safety Glasses, Air Plug
- Manufacturer's Warranty Five-Year Limited
- Item Width 4.88"
- Special Features Extended Magazine, Dry Fire Lockout
- Item Height 12.5"
- Item Length 17.86"
- Magazine Capacity 55
- Country of Manufacture Taiwan
- Item Weight 5.8 lbs.
- Minimum Fastener Length 1-1/2"
- Housing Material Magnesium
- Operating Pressure 70 to 120 PSI
- Firing Type Sequential
- Air Inlet Size 1/4" NPT
- Air Consumption 4.4 SCFM
- Product Type Metal Connector Nailer
- Depth Control No
- Power Source Pneumatic/Air
- Special Offer No
- Diameter Range .131" to .148"
- Product Degree/Angle 34 Degree
- Magazine Type Strip
- Fastener Type Metal Connector Nail
- Series KJ, MD
Write Your Own Reviews
Often Purchased Together
