Dewalt DCN891B 20V Cordless Concrete Nailer w/out Battery, 1/2" to 1"
Box Count: 1
The Dewalt DCN891B 20V cordless concrete nailer is the first of its kind to offer battery-power for concrete and steel nailing. This Dewalt lithium ion cordless concrete nailer drives 1/2" to 1" CCN concrete pins. The DCN891B comes with a DCN8904 drywall nose piece ONLY - this item does not include battery or charger kit. The Dewalt DCN891B runs exclusively on 20V MAX lithium ion battery power - no need for powder loads or fuel cells. Recommended for use with the DCB205 5.0 Ah lithium ion battery, this propellant free concrete nailer can fire 600 shots per charge. The DCN891B cordless concrete nailer also includes tool-free, interchangeable contact trips. This 20V MAX lithium ion nailer can be mounted on Dewalt's DCN8905 extension pole for hard to reach places.
The Dewalt DCN891B is the only concrete nailer of its kind with a field-serviceable driver that can easily be replaced in less than two minutes. Featuring a flywheel based design, the DCN891B nailer minimizes reset time between shots, providing fast application speed. The tool's flywheel design also provides low noise and recoil levels, as compared to other competing concrete nailers. This battery-powered concrete nailer offers three pin depth adjustment settings, which allows the tool to be adjusted for applications ranging from hollow block, to hard concrete and steel. Dual LED lights illuminate your work surface, while LED indicator lights provide on board tool diagnostics. Additional features on this Dewalt cordless concrete and steel pinner include a brushless motor, driver stall release lever, tool-free access points to clear jams, and angled magazine for access in tight areas. The Dewalt DCN891B is excellent for commercial framing, track installation, mechanical and electrical installations, lathing, drywall, insulation, and other surface prep applications. The DCN891B comes with Dewalt's Guaranteed Tough three-year limited warranty.
The DCN891B is a direct replacement for the DCN890B. The DCN891B is capable of running up to 2-1/4" Dewalt CCN Concrete Pins when used with DCN8906 fastener magazine - SOLD SEPARATELY.
- Box Count 1
- SKU DCN891B
- UPC 075352313702
- Power Type Cordless
- Collation Type Plastic
- Application Type Concrete, Steel Fastening
- Brand DeWalt
- Maximum Fastener Length 1"
- Condition New
- Battery Type 20V Lithium-Ion
- Case/Bag Included No
- Manufacturer's Warranty Three-Year Limited
- Item Width 4"
- Special Features Brushless Motor, Dual LED Work lights
- Item Height 16-1/4"
- Item Length 15-1/4"
- Magazine Capacity 33
- Country of Manufacture Mexico
- Item Weight 9.3 lbs.
- Usage Type Interior, Exterior
- Minimum Fastener Length 1/2"
- Housing Material Plastic
- Firing Type Sequential
- Product Type T-Nailer
- Amp Hours 5.0Ah
- Depth Control Yes
- Power Source Battery
- Special Offer No
- Diameter Range .102" to .145"
- Shots/Charge 600
- Magazine Type Strip
- Fastener Type Concrete and Steel Pin