Jaaco NPCN-7312 Coil Concrete & Steel Pin Nailer, 1-1/4" to 3-1/2"

The Jaaco NPCN-7312 (item # NPCN-7312L) wire coil concrete and steel pin nailer, drives 15 degree 1-1/4" to 3-1/2" ballistic pins with optional washers and attachments available. This NailPro tool from Jaaco is capable of attaching plywood to steel framing and concrete, Hardie board to concrete block, and rigid insulation to concrete wall. Tool comes with a one-year warranty. This tool is air-powered, also known as pneumatic, with a maximum operating pressure of 175 PSI.

The NPCN-7312L tool is designed for .100 and .145 pins with standard heads, and .300 heads for gypsum, plywood, siding and concrete block - with power sleeve cap. The power sleeve provides an additional air chamber, which when used can reduce the fluctuation in air pressure from firing the tool. Overall driving power can improve from 5-10% when in use, depending on environmental conditions. The power sleeve is packaged with each nailer, and can be installed on the tool by removing the cover above the air fitting and installing the sleeve attachement to the body - then re-attach the cover to the base of the attachment.

This 15 degree wire coil air pin nailer is available with optional magnetic washer attachments (sold separately). This NailPro tool is three-times faster than screws, lighter than fuel cell tools, and includes dial-a-depth adjustment with sequential fire. Additional applications for the Jaaco NPCN-7312 include stucco into steel (washer curves to avoid damaging the surface), with knurled pins featuring surface etching to allow for steel penetration, and a ballistic or rounded point for entry.